Cassettes/Freewheels

Shimano Dura-Ace R9100 Cassette Spacers

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

Shimano Cassette Lockrings.

Shimano Cassette Lockrings

Problem Solvers Singlespeed 6-bolt Cogs are designed to be used with the Problem Solvers Cog Carrier. - Compatible with 3/32" and 1/8" chains - Cog is also 6-bolt rotor mount compatible for fixed gear use (see instructions for applicable warnings)

Shimano Tourney CS-HG200-7 7-speed cassette Combinations: - 12 – 28T: 12-14-16-18-21-24-28T (bm) - 12 – 32T: 12-14-16-18-21-26-32T (bp)

MicroSHIFT's 7-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 7-speed systems - Steel lock ring - Cassette Cogs: 12-13-15-18-21-24-28

- For HG 8-speed chains

SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.

H82 8-speed cassettes are nickel plated for durability, and constructed using the same processes as microSHIFT's higher end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 8-speed systems - Steel lock ring

These 8-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 8-speed systems - Steel lock ring Gear combinations: - 12-25T: 12-13-15-17-19-21-23-25 - 11-28T: 11-13-15-17-19-21-24-28 - 11-32T: 11-13-15-18-21-24-28-32 - 12-32T: 12-13-15-18-21-24-28-32 - 11-34T: 11-13-15-18-21-24-28-34

These 9-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 9-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-15-17-19-21-23-25 - 12-25T: 12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-15-17-19-21-24-28 - 11-32T: 11-13-15-17-19-21-24-28-32 - 11-34T: 11-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-18-21-24-28-32-36

H92 9-speed cassettes are nickel plated for durability, and constructed using the same processes as microSHIFT's higher end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 9-speed systems - Steel lock ring

- MODEL NO: CS-HG41-7 - SERIES: SHIMANO - Combination: 11-13-15-18-21-24-28T (ac) - Combination name(Group name): 11-28T (ac) - Compatible chain: IG/HG - Speeds: 7-speed - Type: HG

Shimano's Claris cassette is an incredible value for your 8-speed drivetrain. This cassette comes in a range of sizes to suit your riding style and terrain.

Turn any 8-10 speed HG-splined cassette hub into a 3/32-inch 16-tooth singlespeed.

M9 Cassettes offer a wide-range ratio for 9-speed MTB sytems. - Nickel Finish - Steel spider

MicroSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Sprockets are chrome-plated for hardness and corrosion resistance - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-32T: 11-12-13-15-17-19-21-24-28-32 - 11-34T: 11-12-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-17-19-21-24-28-32-36

Problem Solvers Cog & Carrier adapts multi-speed Shimano HG freehubs for singlespeed use. - Wide-profile alloy cog carrier supports a single speed cog - 6-bolt chromoly cog included, compatible with 3/32" and 1/8" chains - Carrier is splined for Shimano HG freehub compatibility - Additional cogs available separately

- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 8

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

SRAM's PowerGlide PG-830 Cassette is a quality 7-speed cassette. It boasts durable chrome-plated steel cogs with SRAM's shifting technology that includes optimal tooth profiles and ramps for fast, precision shifts every time.

The Acolyte 8-speed cassette gives you all the range you need to challenge yourself.  Whether you’re climbing the Cascades or the neighborhood sledding hill, all you have to think about is where to put the bike – Acolyte will take care of the rest.  And yes, it works with a standard HG freehub body and a normal 8-speed chain. - Steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies

M9 Cassettes offer a wide-range ratio for 9-speed MTB sytems. - Nickel Finish - Steel spider

MicroSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance Gear combinations: - 11-25T: 11-12-13-14-15-16-17-19-21-23-25 - 11-28T: 11-12-13-14-15-16-17-19-21-24-28 - 11-32T: 11-12-13-14-15-17-19-21-24-28-32 - 11-42T: 11-13-15-17-19-21-24-28-32-36-42

RS1 Cassettes are a great replacement for 10-speed road sytems. - Steel Spider - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Cassette Cogs: 11-12-13-14-15-17-19-21-24-28 - Drivetrain Speeds: 10 - Weight: 267 g

8-speed SIS compatible freewheel

When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG

Go further with smooth and long-lasting e-biking performance with the Shimano CS-LG400 LINKGLIDE cassette. ONLY Compatible with LINKGLIDE shifting system. - LINKGLIDE technology provides up to three times the durability of HYPERGLIDE in high chain tension conditions - Smooth 2-way shifting (inward and outward) with reduced pedal shock - Optimized shifting gate design - Rider-tuned gear steps - Compatible with LINKGLIDE and HG 11-speed chains - Only compatible with LINKGLIDE shifting system

The SunRace R8 8-Speed Cassette is a lightweight cassette that utlizes Super Fluid Drive™ technology. - Lightweight design - Features Super Fluid Drive™ technology - Nickel finish

When it comes to adventurous riding, a wider gear range is often better. The microSHIFT ADVENT cassette has the low gears to get up and the high gears to get back down. Steps between gears are optimized to give an even spread between shifts, reducing the need for double-shifting to find the right gear. - 9-speed, 11-38T cassette provides wide range and low gears for bikes with smaller wheels. - microSHIFT's “Wide Enough” 11-42T gear range works well for a variety of skill levels and riding conditions - 11-46T range with even gear steps for predictable gear changes - Chromoly cogs are continuously forged for strength and shifting accuracy - Compatible with Shimano HG freehub body standard - ED black surface finish

- 9-speed MTB cassette - Super Fluid Drive™ technology - Steel cogs and lock ring - ~ 350g - SHIMANO Equivalent CS-HG50 / CS-HG30 / CS-HG20

The Shimano CS-HG400 cassette provides reliable shifting performance for various riding styles. - Delivers fast and reliable shifting - Wide range provides riders with easy climbing gear - Compatible with Shimano IG chains

No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH

Shimano's Sora cassette is an incredible value for your 9-speed drivetrain. Crisp shifting and a low weight keep your mind focused on having fun on your bike and not adjusting it. This cassette comes in a range of sizes to suit your riding style and terrain.

Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.

Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

With the REACT series, KMC has filled a gap in its lineup of drive solutions. Just like KMC chainrings and sprockets, REACT cassettes are precisely designed to match KMC chains. This perfect synergy reduces friction between individual components and enhances the lifespan of all drive components. Meticulously crafted ascent and descent ramps ensure precise chain guidance, improving shifting performance across the entire range. Made from high-strength steel, REACT cassettes are compatible with Shimano HG - Lifting and lowering ramps provide improved shifting performance, overall component interaction efficiency and stability - Unique lifting ramps design carries the chain smoothly upward on the cogs - Distinctive lowering ramps adeptly align the chain quickly - Cogs sizes are design to provide smoother shifting and precise chain indexing to suit all riders - Optimized for use with KMC e10, X10, X10 EL, and X10 SL chains

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-13-15-18-21-24-28 - 12 – 28T: 12-14-16-18-21-24-28 - 12 – 32T: 12-13-15-18-21-24-32

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-14-16-18-21-24-28 - 11 – 32T: 11-12-14-16-18-21-26-32

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-13-15-17-19-21-24-28 - 11 – 32T: 11-12-14-16-18-21-24-28-32 - 11 – 34T: 11-13-15-17-20-23-26-30-34

When it comes to adventurous riding, a wider gear range is often better. With 9 speed and a 11-42T range, the ADVENT cassette has the low gears you need to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. - Machined aluminum large cog for reduced weight - Carbon steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies - Surface Finish: ED Black / Anodized Black - Combination: 11-13-15-18-21-24-28-34-42

microSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance

Go further with smooth and long-lasting e-biking performance with the Shimano CS-LG300 LINKGLIDE cassette. ONLY Compatible with LINKGLIDE shifting system. - LINKGLIDE technology provides up to three times the durability of HYPERGLIDE in high chain tension conditions - Smooth 2-way shifting (inward and outward) with reduced pedal shock - Optimized shifting gate design - Rider-tuned gear steps - Compatible with LINKGLIDE and HG 11-speed chains - Only compatible with LINKGLIDE shifting system

CS-G100 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent shifting performance from cassette to cassette - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Aluminum lock ring

You've got to have the right ratio for the track, and Shimano's Dura-Ace cogs come in a range of tooth counts so you can always be prepared. Manufactured from durable chromoly steel, each cog is machined to run perfectly straight.

CS-G110 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Aluminum lock ring Combinations: - 11 – 25T: 11-12-13-14-15-16-17-19-21-23-25 - 11 – 28T: 11-12-13-14-15-16-17-19-21-24-28 - 11 – 32T: 11-12-13-14-15-17-19-21-24-28-32

microSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Sprockets are chrome-plated for hardness and corrosion resistance - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Steel lock ring

Shimano Deore M6000 CS-HG500-10 10-speed cassette. Combinations: - 11 – 25T: 11-12-13-14-15-17-19-21-23-25T - 12 – 28T: 12-13-14-15-17-19-21-23-25-28T - 11 – 32T: 11-12-14-16-18-20-22-25-28-32T - 11 – 34T: 11-13-15-17-19-21-23-26-30-34T

- English threads, 1.37 x 24tpi - 1/2 x 3/32'' freewheel

- English threads, 1.37 x 24tpi - 1/2 x 3/32'' freewheel

- 9 speed wide range - 11-40t - Steel spider

Sometimes less is more. With 10 speeds, an 11-48T range, and evenly spaced gear steps, the ADVENT X cassette allows riders to shift less often to find the right gear, while still having enough range to ride what they want. Fewer cogs also means less weight and a wider chain for better mud shedding. It even fits on standard 10-speed freehub bodies so you don't need to buy new wheels for no reason. In short, it's everything you want in a high-end drivetrain. - 11-48T range with even gear steps for predictable gear changes - Hardened steel cogs are optimized for eBike compatibility - ED black with anodized surface finish - Continuously forged precision cogs

- English threads, 1.37'' x 24tpi - 1/2 x 1/8'' freewheel

- English threads, 1.37'' x 24tpi - 1/2 x 1/8'' freewheel

SOLO-XD 16T Single Speed Cog SOLO-XD Single Speed chainrings are designed with narrow to wide alternating tooth pattern allowing for superior chain retention. 7075 Aluminum Tooth Count: 16 Compatible with SRAM XD/XDR Freehub Bodies on the SOLO-XD. *Cogs are optimized for use with SOLO-XD and SOLO-SPLINE Carrier system only.

SOLO-COG - 19T Single Speed Cog Single Speed cogs with a unique tooth pattern for superior chain retention. 7075 Aluminum Tooth Count: 19. *Cogs are optimized for use with SOLO-XD and SOLO-SPLINE Carrier system only.