Lighting

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

Packed in a sleek profile that complements your road bike, the Hotrod 50™ unleashes a powerful 50 lumens of radiant wide coverage. Its 6 attention grabbing modes keep motorists aware of your presence any time you’re on the road. Its Versatite™ flexible mount lets you attach the Hotrod 50™ tail light to most seat posts and seat stays, including aero styles. Performance - Powerful 50 lumens flashing - Low profile, compact size - USB rechargeable Li-ion battery - Low battery indicator - Water-resistant design - 1:30 ~ 100 hr run time - System Weight: 29g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles Patent pending. *Features and specs are subject to change without notice.

Engineered for road cyclists, the sleek Dash™ 520 elevates your adrenaline rushes to another level with an aggressively powerful 520 lumens to pierce through the night. Its highly efficient lens enables an extra-wide, long-range beam to maximize your line of sight. Beyond its exceptional night capabilities, an attention grabbing array of quad Daytime Running Lights (DRL) makes you stand out in broad daylight. Every bit the road cyclist’s light, it uses a low-profile flexible mount designed for most handlebars including aerobars. Patent pending. - Powerful 520 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Quad LED Steady - Quad LED Flashing) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your way at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 79 grams - Side illumination ports highlight your presence to nearby motorists - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars Specs: - LED OUTPUT: 520 lumens - TOTAL MODES: 8 RUN TIMES: - Low: 10 hrs - Medium: 3 hrs - High: 1:30 hrs - Boost: 1 hrs - SteadyPulse®: 3 hrs - Quad LED Steady: 8:30 hrs - Quad LED Flash: 63 hrs - DayLightning®: 9 hrs - CHARGE TIME: 3 hrs - MOUNTING: Flexible Handlebar Mount - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 79g Patent pending. *Features and specs are subject to change without notice.

We've teamed up our popular Blaze 210 SL headlight & Superflash USB tail light to create the rechargeable bike light set that is eye catching from 360°. It’s a perfect commuter combo set that can transition from busy roads to multi-use paths with the click of a button. The Superflash mode is great for daytime visibility and the Courtesy mode shines best on paths. What a combo! Blaze 180 USB specs: - Cree XPG3 LED provides high and low power beam along with Courtesy & Superflash modes - FL1 Tested: Run times: 2 hrs (high - 210 lm), 3 hrs (low - 120 lm), 5 hrs (Courtesy - 65-185 lm) and up to 21 hrs (Superflash - 210 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 1000 mAh lithium polymer battery charges in 3 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist bracket mounts, adjusts or removes without tools - 87 grams Superflash USB specs: - High output surface mounted LED plus 2 5mm LEDs provide steady, Courtesy & Superflash modes - Run times: 8 hrs (steady – 4 lm), 10 hrs (Courtesy - 1-3 lm) and up to 36 hrs (Superflash - 4 lm) - Provide 180° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 230 mAh lithium polymer battery charges in 2-4 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Includes seat post and seat stay mounts and clip mount for multiple mounting options - Mount it to your rear rack with the Rack Bracket (#3108) which is sold separately - 59 grams

The most advanced front/rear cycling light combo available. The Connect Smart Pair comes equipped with our Smart Connect wireless technology. This pair of lights can be quickly programmed and customized by the companion LED Ally phone app. Once programmed and paired, the front light wirelessly controls the rear light when toggling through its modes. Setup only the modes you need, and up to four mode-sets for whatever type of riding is planned, day or night. Front A powerful, multi-purpose front light with up to 1000 lumens of output. Its machined aluminum body is lightweight, super-rugged and heat-dissipating. It features eight output modes, with a class-leading 1000 lumen Daytime Flash mode. With its MOR (Maximum Optical Reflection) lens, light output is optimized and evenly dispersed. And its versatile strap securely mounts to a variety of bar shapes and sizes. Rear Powerful and versatile cycling taillight with a highly visible 75 lumen Daytime Flash mode. Its construction features a light and durable co-molded design that’s IPX7 (waterproof) rated. It has six output modes, and features our Wide Angle Optics for up to 270° of visibility. The KTV Smart 75 is compatible with round or aero posts, and it has an integrated cable-free recharging USB stick. Specs - Max Lumens: 1000 (front) / 75 (rear) - Weight: 153g (front) / 45g (rear) - Max Runtime: 87 Hours (front) / 19:30 Hours (rear) - Recharge Time: 5:30 Hours (front) / 2:15 Hours (rear)

The KTV Pro Smart Pair is the most advanced pair of cycling lights for commuters and cyclists looking for greatly improved visibility. The pair comes equipped with our Smart Connect wireless technology, which allows them to be quickly programmed and customized by the companion LED Ally phone app. Once programmed and paired, the front light wirelessly controls the rear light when toggling through its modes. Set up only the modes you need, with up to four mode-sets for a variety of cycling settings. Front The front light is super-compact and lightweight, and features a super bright 200-lumen Daytime Flash mode. Its co-molded construction is super durable and has an IPX7 waterproof rating. With a cable-free USB recharging stick, it can run for up to 20 hours on a full charge. And the 2-in-1 patented clip/strap system attaches to a variety of bars and loops. Rear Powerful and versatile cycling taillight with a highly visible 75 lumen Daytime Flash mode. Its construction features a light and durable co-molded design that’s IPX7 (waterproof) rated. It has six output modes, and features our Wide Angle Optics for up to 270° of visibility. The KTV Smart 75 is compatible with round or aero posts, and it has an integrated cable-free recharging USB stick. Specs - Max Lumens: 200 (front) / 75 (rear) - Weight: 47.5g (front) / 45g (rear) - Max Runtime: 20 hours (front) / 19:30 hours (rear) - Recharge Time: 2:15 hours (front) / 2:15 hours (rear)

The Strip Drive Front is a highly versatile LED cycling light offering up to 400 lumens. It features a lightweight and waterproof design with a durable co-molded lens/body construction. Its unique aero- and round-bar-compatible backside can mount to many odd shapes and sizes. It has an enhanced lens with built-in side visibility and five high-output LEDs. An integrated, cable-free USB stick makes charging simple, and the Strip Drive Front can run for up to 21.5 hours on a single charge. Specs - Max Lumens: 400 - Weight: 69g - Max Runtime: 21:30 hours - Recharge Time: 2 hours

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

- Supercharged 1:30 to 110 hour run time. - Extremely powerful 2,000 lumens in the most compact and stylish form - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking. - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets. - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: Red = lower than 25%, Yellow = 50%-25%, Green = fully charged - No tools bracket - Sold with Avenue R-30 rear taillight - Rear light includes 5 modes - Side illumination ports

A bright and reliable urban bike light combo set. These lights provide cyclists with all the modes to stay bright as they pedal around town day or night. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX5 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Grateful Red specs: - PB 28 LED Power Array provide steady, Courtesy and Superflash modes - FL1 tested Run times: 26 hrs (steady – 13 lm), 45 hrs (Courtesy - 4-11 lm) and up to 150 hrs (Superflash - 13 lm) - Provide 160° of visibility - Highly visible, even in daylight - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes rear rack and seat post mounts plus rear clip for multiple mounting options - 85 grams

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.

Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

The Beamer 80 was born to be an urban warrior! It's super bright to light your way night or day. This compact light provides 80 lumens of high beam power along with Superflash and Courtesy modes. It packs a big beam but is small enough to stash in your pocket between stops. - High output surface mounted LED provides high power beam along with Courtesy & Superflash modes - FL1 Tested - Run times: 6.5 hrs (80 lm), 24 hrs (Courtesy -24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam mount adjusts or removes without tools - 63 grams

2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

FRONT LIGHT: The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to various handlebar shapes and sizes. REAR LIGHT: The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. - Front Light Max 500 lumens / 20-hour runtime in Femto mode - Front Light Max 500 lumens / 20-hour runtime in Femto mode - CNC-machined aluminum construction - Daytime Flash mode with Highly Disruptive Pattern - Integrated USB stick for cable-free recharging - GoPro mount available separately - Multiple color options to match your style - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity - Rear Light Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - Integrated USB stick for cable-free recharging - 400 mAh battery capacity

Experience unparalleled illumination and versatility with the Lite Drive 1200+ Front. With eight LEDs, this light has a maximum output of 1,200 lumens and an impressive 60-hour max runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Its waterproof USB-C 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. The fresh optical design and the MOR(Maximum Optical Reflection) lens optimize light dispersion for enhanced visibility. With the optional GoPro mount and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting options and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the long-lasting 60-hour runtime Femto Mode, to suit your lighting needs. Illuminate your rides with confidence using the Lite Drive 1200+ Front. - Max 1,200 lumens / 60-hour max runtime - Max 1,200 lumens / 60-hour max runtime - Waterproof USB-C 2A fast charging - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - Infinite Light Power Pack+ Compatible for extended run times - 3800 mAh battery capacity

The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Max 150 lumens / 20-hour runtime in Femto mode - Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

350 lumens packed into an unbelievably compact form, the all-new Hypershot 350 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 350 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 350 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs

Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. - Rechargeable headlight (500 lm) - Wide beam with OptiCube lens technology - Excellent side visibility - Low battery indicator (Illuminates in red with less than 20% battery remaining) - USB rechargeable (Micro-USB cable included) - Mode memory function - Four light modes (High / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Improved release button has made it easy to remove the light unit from the bracket - Helmet mount and center fork bracket (optional) Run time: - High mode 500 lumens: 1.5hrs - Low mode 250 lumens: 3hrs - Daytime HyperConstant mode 500/250 lumens: 5hrs - Flashing mode 250 lumens: 50hrs ViZ150 Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs

AMPP200 200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs ViZ 100—Compact and versatile, the ViZ100 stands out with Daytime Hyperflash mode in an economical package. - 3 LEDs (100 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (15 lumens):5 hrs - Flashing (10 lumens):70 hrs - Group Ride (35 lumens):11 hrs - Daytime Hyperflash (100 lumens):15 hrs

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

If you’re looking for a brilliant combo set that’s powered by replaceable batteries, the Blaze 150 SL & Superflash Turbo set is a great choice. We've teamed up our brightest battery powered headlight and tail light to create the bike light set that is eye catching from 360°. Blaze 150 SL specs: - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 4.8 hrs (high – 150 lm), 11 hrs (low - 80 lm) and up to 62 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams Superflash Turbo specs: - High output surface mounted LED plus 2-5mm LEDs provide steady & Turbo flash modes - Run times: 5 hrs (steady – 20 lm) and up to 100 hrs (Turbo flash - 20 lm) - Provide 180° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and clip mount for multiple mounting options - Mount it to your rear rack with the Rack Bracket (#3108) which is sold separately - 75 grams

The Rojo 100 USB rechargeable bike tail light is designed to keep you safe and visible on every ride, day and night. It’s packed with up to 100 lumens of power so you’ll be sure to be noticed on your daytime rides and commutes whether you’re on the road, bike path or turning the corner downtown. Four precision engineered lighting modes let you select the perfect optimized optical output. - 2 high output Cree XB-D LEDs provide four modes for every kind of ride (Steady, Pulse, Courtesy & Superflash Turbo settings) - See the light in action here! - Tested to FL1 standards - Run times: 5 hrs (Steady – 25 lm), 10 hrs (Pulse - 50-90 lm), 12 hrs (Courtesy - 30-90 lm) and up to 15 hrs (Superflash - Turbo - 100 lm) - Provide 270° of visibility - Designed for when you ride the most…during the daytime. The Rojo 100 is engineered to be highly visible even in bright, sunny conditions - Water resistant – Don’t be worried to ride in the rain, the Rojo 100 is dust & water resistance rated to the IP66 standard - Fast recharging - 650 mAh lithium polymer battery charges in 2.5 hours with micro USB type C cable (included) - Multiple mounting options - Includes rear rack, seat post, seat stay and clip mount flexible mounting options - 48 grams

The Blaze 600 SLX provides high lumen output, generous run times and 275° of visibility. The addition of amber side lights and Courtesy mode make it a bike path hero. - Cree XPL2 LED provides high, medium and low power beam along with Courtesy & Superflash modes - FL1 Tested – Run times: 1.8 hrs (high - 600 lm), 3.7 hrs (medium - 300 lm), 8 hrs (low - 150 lm), 20 hrs (Courtesy 150-250 lm) and up to 40 hrs (Superflash - 600 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP66 standard - Sanyo 2600 mAh lithium ion battery charges in 5 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist mount adjusts or removes without tools - Includes Lockout mode - 145 grams

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately